6. Click Apply button to apply the changes.
– End of Steps –
3.9.2 Configure the MLD
The section describes how to configure MLD. MLD provides the parameters of
configuration features.
Steps
1. On the main page of the ZXHN H267N, select Internet > Multicast > MLD to go to
the MLD page.
The page is shown in
Figure 3-33 MLD Configuration Page
MLD
Mode
2. Enable the
l
Click All On to select all
l
Click All Off to cancel all
3. Click Apply button to apply the changes.
WAN
Connection
4. Click MLD WAN Connection to open MLD WAN Connection page, as shown in
Figure
SJ-20140702105807-002|2014-11-13 (R1.0)
Figure
MLD
Mode.
Note:
3-34.
3-33.
MLD
functions.
MLD
functions.
3-39
Chapter 3 Configure the Internet
ZTE Proprietary and Confidential
MLD