Contents and general instructions
Instructions on this description
VIII
This description contains information about installation and
configuration of the CPX control block for PROFINET as well
as PROFINET−specific information regarding parametrisation,
commissioning, programming and diagnosis of a CPX
terminal in a PROFINET network.
Further information about PROFINET can be obtained on the
World Wide Web at
www.profinet.com
Also observe the following PROFINET−specific document:
PROFINET Installation Guide
General basic information on the mode of operation,
mounting, installation and commissioning of CPX terminals
can be found in the CPX system description (P.BE−CPX−SYS...).
Information about further CPX modules can be found in the
manual for the respective module.
An overview of the structure of the CPX terminal user
documentation is contained in the CPX system description.
Product specific information about the control system
(IPC, PLC or I/O controller) can be found in
the manufacturer's product documentation.
Festo P.BE−CPX−SF34+SF35−E N en 1007NH