Table of Contents
Advertisement
2. Commissioning
1
1
Select control block CPX−SF34 or CPX−SF35
Fig. 2/9: Select controller
Device name
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
3. Click in the Read PROFINET" window on the controller
that you would like to configure and then on Insert".
A window is displayed for selection between the
CPX−SF34 and CPX−SF35 (see Fig. 2/9).
4. Click on the type of your control block and confirm with
OK. This adds the chosen controller to the configuration.
5. Close the window Read PROFINET" (Fig. 2/8) with
Close".
6. Use the automatically created device name or issue your
own device name:
Device Details" window in the PROFINET Settings" tab,
a PROFINET device name for the CPX−SF34/35
(see Fig. 2/11).
7. When reading in the configuration, 64 IO bytes are
automatically created
8. Variable generation and process data assignment takes
place manually and is described in section 2.5.3.
2−17
Advertisement
Chapters
Table of Contents
