Festo CPX-SF34 Manual page 69

2. Commissioning
Fig. 2/18: Setting monitoring system parameter
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
Note
Monitoring system parameter KZS/KSA/KZV, U
The short−circuit /overload and undervoltage diagnostic
messages for the complete CPX terminal can be
suppressed using the monitoring system parameter.
The settings made separately for each module with the
CPX module parameter monitoring are not affected by the
setting of the system parameters monitoring.
Additional information on parametrisation can be found in
the CPX system manual (P.BE−CPX−SYS−..) in Appendix B.
:
OUT/VAL
2−37