Table of Contents
Advertisement
3. Diagnosis
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
The LEDs are shown in their various states as follows:
illuminated
Normal operating status
In normal operating status, the following LEDs are lit:
PS, PL and, if applicable, also TP1, TP2 and M (see Tab. 3/2).
The SF and NF LEDs do not light.
The M−LED lights when a user program runs.
LED display
NF
PS
PL
TP1
SF
M
TP2
1)
Only when a user program is running (Motion/RUN)
2)
Only if connection is used: (off: connection made to the PROFINET
IO controller (when NF−LED off ), flashing: Data transmission is
running)
Tab. 3/2:
Normal operating status
;
flashing ;
off;
The following LEDs
are lit:
PS
PL
1)
M
The following LEDs
are not lit:
SF
NF
TP1/TP2
Operating
status
Normal
2)
3−5
Advertisement
Chapters
Table of Contents
