Table of Contents
Advertisement
2. Commissioning
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
Input a name for the variables and end it with a hash
·
mark, e.g. Input#". Confirm with OK.
This creates 8 variables Input0 ... Input7" with the type
Bool as standard.
Repeat the last two steps in this example for the outputs
·
with Output#".
You have now created 8 variables each for the inputs and
outputs. In the next step, the process data of the input and
output modules of the CPX terminal are assigned to these
variables.
Assignment of the process data
1. For assignment of the process data, change into the
Process Data Workspace" : Menu [View] [Process Data]
or with the symbol shown to the left.
2. Click in the right window on the entry of the CPX−
SF34/35.
In the left window, below the Symbols/Variables" tab,
the folder STD_RES is displayed in the directory tree
(see fig. left).
3. Click on Default" in the folder STD_RES".
The newly created variables are displayed below the
window.
2−29
Advertisement
Chapters
Table of Contents
