Festo CPX-SF34 Manual page 23

1. Installation
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
Boot settings of the PLC
Choose the boot settings of the PLC with the switch element
DIL 1.1 of the DIL switch
formatting of the memory card:
DIL switch Setting
All DIL switches:
OFF
(factory setting)
DIL 1.1: ON
DIL 1.2: OFF
DIL 2.1: OFF
DIL 2.2: OFF
DIL 1.1: Any
DIL 1.2: ON
DIL 2.1: OFF
DIL 2.2: OFF
Tab. 1/1: Boot settings of the PLC with DIL switch
Note
A requirement for automatic starting of the Boot program
with AUTORUN is that there are no deviations between the
actual and nominal configuration (see section 2.4.2).
1
: PC WORX" or AUTORUN" or
Function
Operating status of the
PLC: PC WORX"
The start of the user
program is controlled via
PC WORX.
Operating status of the
PLC: AUTORUN"
The boot program starts
as soon as the
CPX−SF34/35 is supplied
with voltage.
Formatting the memory
card:
1. Set DIL 2.1 to ON.
2. Execute POWER
OFF/ON The memory
card is now formatted.
3. Set DIL 2.1 back to OFF.
1)
1
1−9