2. Commissioning
1
1
Selecting parameter group
Fig. 2/19: Setting module parameters
2−38
Setting module parameters
1. Click in the Bus Structure" window on the entry of the
module that you would like to parametrise (see Fig. left).
2. Click in the Device Details" window on the Device
parameters" tab (see Fig. 2/19)
3. Set the desired parameters, as shown in Fig. 2/19.
2
Note
Module parameters can refer to:
Properties of the complete module
Properties of an individual channel of a module
Setting parameters
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
2