Table of Contents
Advertisement
A. Technical appendix
Network−specific characteristics
Network protocol
Specification
Transmission technology
Design
Baud rate
Interfaces
CPX−SF34
CPX−SF35
Cross−over identification (only CPX−SF34)
PROFINET input/output size
Tab. A/2:
Network−specific characteristics of CPX−SF34/35
PLC
Programming languages
Program memory
Processing speed
Programming interface
Tab. A/3:
Characteristics of the PLC of the CPX−SF34/35
A−4
PROFINET IO RT (PNIO RT):
based on Industrial Ethernet
based on the Ethernet protocol (IEEE 802.3)
Real−time−capable
Directives, standards and norms
related to PROFINET:
PROFINET Installation Guide
IEC 61158
IEC 61784
Switched Fast Ethernet
100BaseTX as per IEEE 802.3
100 Mbit/s
2 x RJ45, Cu, AIDA−conforming,
see Tab. 1/2 in section 1.5.2
2 x SCRJ, POF fibre−optic cable, 650 nm, AIDA−
conforming, see Tab. 1/3 in section 1.5.2
Auto−MDI
64 bytes/64 bytes
AWL/IL, FB, KOP, SFC, ST (as per IEC 61131−3)
2 MB, of which 512 kB for Boot project
1
2 ms per 1000 instructions
via PC WORX
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
Advertisement
Chapters
Table of Contents
