Festo CPX-SF34 Manual page 96

A. Technical appendix
A.4 Function blocks for the CPX−SF34/35
A−6
On the following pages, you will find a listing of the function
block usable for the CPX−SF34/35. Additional information on
the function blocks can be found via PC WORX as follows:
1. Change into the IEC Programming Workspace":
Menu [View] [IEC Programming] or with the symbol
shown to the left.
2. Select a group of functions in the Edit Wizard" in the
list field under Group". If the Edit Wizard" is not
visible, switch it on via the menu [View] [Edit Wizard].
3. In the context menu of the corresponding function, click
on Help on FB/FU". Additional information on the
function block is displayed (see Fig. A/5).
Festo P.BE−CPX−SF34+SF35−EN en 1007NH