Operation Flowchart (Outdoor Unit) - Daikin RXYQ-TA Series Service Manual

Operation Flowchart (Outdoor Unit)

1. Operation Flowchart (Outdoor Unit)
Stop control
(1) Stop due to error
(2) When system is in stop mode
(3) Slave unit stops during master unit operation
Standby control
(1) Restart standby
(2) Crankcase heater control
Startup control
(include pressure equalization before startup)
(1) Startup control in cooling
(2) Startup control in heating
Normal operation
(1) Normal operation
(2) Compressor capacity control
(3) Operation priority and rotation of
compressors
(4) Compressor step control
(5) Electronic expansion valve control
(6) Step control of outdoor unit fans
Protection control
(1) High pressure protection control
(2) Low pressure protection control
(3) Discharge pipe protection control
(4) Compressor body protection control
(5) Inverter protection control
(6) Heating operation prohibition
Note: 1. In the event indoor unit stops or the thermostat turns OFF while in oil return operation or defrost
2. Not performed during cooling mode.
51
Thermostat ON
Thermostat
ON
End of
startup
control
Conditions met for oil return
Conditions met for defrosting
operation, pump down residual operation is performed on completion of the oil return operation
or defrost operation.
Special control
(1) Pump down residual operation
(note 2)
Thermostat OFF
(2) Outdoor unit rotation
(3) Oil return operation (note 1)
(4) Defrost operation (note1)
Functions and Control
SiUS341615E