Daikin RXYQ-TA Series Service Manual page 128

Field Setting from Remote Controller
Setting "Restricted / Permitted" of Airflow Block
(For units with the infrared presence sensor only)
Due to possibility of dew condensation, the airflow block function cannot be enabled when closure material kit,
fresh air intake kit, natural / separately installed evaporation humidifier, or branch air duct is equipped.
This setting will prevent the airflow block is advertently set to ON.
Ensure that this setting is "Disable airflow block" when using together with options listed above.
Mode No.
1b (2b)
Room Temperature Display (For BRC1E73 only)
A "Detailed display screen" can be selected as the display screen. This setting is used if you do not want to
display "Room temperature display" on the "Detailed display screen."
Mode No.
1c (2c)
115
First Code No. Second Code No.
14
First Code No. Second Code No.
0
01
02
03
04
05
01 Room temperature is not displayed.
02 Room temperature is displayed.
SiUS341615E
Contents
Airflow block permitted
—
—
—
Airflow block restricted
Contents
Field Settings