Daikin RXYQ-TA Series Service Manual page 52

Names and Functions
4. Up button
Used to raise the setpoint.
The item above the current selection will be highlighted.
(The highlighted items will be scrolled continuously when the button is continuously pressed.)
Used to change the selected item.
5. Down button
Used to lower the setpoint.
The item below the current selection will be highlighted.
(The highlighted items will be scrolled continuously when the button is continuously pressed.)
Used to change the selected item.
6. Right button
Used to highlight the next items on the right-hand side.
Each screen is scrolled in the right-hand direction.
7. Left button
Used to highlight the next items on the left-hand side.
Each screen is scrolled in the left-hand direction.
8. On/Off button
Press this button and system will start.
Press this button again to stop the system.
9. Operation lamp
This lamp illuminates solid green during normal operation.
This lamp blinks if an error occurs.
10. Cancel button
Used to return to the previous screen.
11. LCD (with backlight)
The backlight will be illuminated for approximately 30 seconds by pressing any button.
If two remote controllers are used to control a single indoor unit, only the controller accessed first will have
backlight functionality.
39
SiUS341615E
Remote Controller