Daikin RXYQ-TA Series Service Manual page 118

Field Setting from Remote Controller
Filter Cleaning Sign
Whether or not to display "Filter Cleaning" after operation of certain duration can be selected.
Mode No.
10 (20)
∗ Filter cleaning sign is not displayed when an Auto-clean Panel is connected.
Time for Absence Area Detection
(For units with an Infrared Presence Sensor only)
By selecting the energy-saving operation mode in the absence, the target temperature is shifted to the energy-
saving end by 1°C (maximum 2°C) after the state of absence continues for a certain period of time.
Absent time defined for detection can be selected as follows:
Mode No.
10 (20)
• The set temperature displayed on the remote controller remains same even if the target temperature is shifted.
• As soon as people is detected while the temperature is shifted, this control will be cancelled (reset).
105
First Code No. Second Code No.
3
First Code No. Second Code No.
7
31
30
29
28
27
Cooling (at 28˚C)
26
21
Heating (at 20˚C)
20
19
18
17
∗ The values in parentheses represent the time
when Second code No. is "02."
01
02
01
02
Human detection
State of absence
30 (60)∗ 60 (120)∗
Elapsed time of absence (min.)
SiUS341615E
Contents
Displayed
Not displayed
Contents
30 minutes
60 minutes
Field Settings