Daikin RXYQ-TA Series Service Manual page 117

SiUS341615E
When the unit is equipped with an infrared floor sensor:
Mode No.
10 (20)
11 (21)
The thermistor to be used
Remote controller thermistor
Suction air thermistor
Infrared floor sensor
∗ Refer to Compensating the temperature around people.
Note that the control is automatically switched to the one performed only by the suction air thermistor for indoor
unit when the Second code No. is 01 during group control.
To use the remote controller thermistor during group control, select the Second code No. 02 in First code No. 6.
Mode No.
10 (20)
Field Settings
(˚F) (˚C)
96.8 36
93.2 34
89.6 32
86 30
82.4 28
78.8 26
75.2 24
71.6 22
68 20
17 19
62.6 66.2
(˚F) (˚C)
89.6 32
86 30
82.4 28
78.8 26
In heating
75.2 24
71.6 22
68 20
64.4 18
60.8 16
57.2 14
14
57.2 60.8 64.4
First Code No.
2 01
8 01
—
The infrared floor
sensor is not used
Only the suction air
thermistor is used
First Code No. Second Code No.
01
6
02
In cooling
Suction air Remote controller
thermistor
thermistor
Suction air
Remote controller
thermistor
thermistor
21 23 25 27 29
69.8 73.4 77 80.6 84.2 87.8 91.4
Suction air temperature
Suction air
Remote controller
thermistor
thermistor
Suction air Remote controller
thermistor thermistor
16 18 20 22 24 26
68 71.6 75.2 78.8 82.4
Suction air temperature
Second Code No.
02 02
01 02
— —
—
Priority given to
the suction air
temperature (∗)
Standard setting
(Factory setting)
Remote controller thermostat control is not permitted during group control.
Remote controller thermostat control is permitted during group control.
Field Setting from Remote Controller
Suction air
thermistor
Suction air
thermistor
31 33 35 37 (˚C)
95 98.6 (˚F)
Suction air
thermistor
Suction air
thermistor
28 30 32 34 (˚C)
86 89.6 93.2 (˚F)
02 02 03
03 04 01
— —
—
—
Priority given to the
floor temperature (∗)
Only the remote
controller thermistor
is used
Contents
104