Parameters For Provisioning Lan Unit In Spanning Tree Mode - Alcatel-Lucent 1643 AMS User's Operation Manual

Access multiplexer and access multiplexer small (formerly metropolis am and metropolis ams) release 1.0 through 7.2
Hide thumbs Also See for 1643 AMS:
Table of Contents

Advertisement

Traffic provisioning

Parameters for provisioning LAN unit in spanning tree mode

...................................................................................................................................................................................................................................
ALAF
The NE Automatic Learning and Forwarding Status [Enabled, Disabled].
Acceptable frame type (LAN port)
The Acceptable Frame Type mode of the LAN Port shall be displayed and shall be
either: 'All Frames' or 'VLAN Tagged'.
Acceptable frame type (WAN port)
The Acceptable Frame Type mode of the WAN Port shall be displayed and shall be
either: 'All Frames' or 'VLAN Tagged'.
Bridge address
The MAC address of the Virtual Switch.
Create time
The Creation Time of the Virtual Switch.
CIR
Committed Information Rate.
Ether type
Ethernet type
It is recommended only to provide one of the following two values:
0x8100
for IEE802.1Q STP
0x9100
for IEEE802.1ad STP
Flow type
The flow type can be set to Port/Userpriority/VLAN or Port/Userpriority.
GVRP
Dynamic VLAN Registration Protocol
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-117

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1643 am

Table of Contents