Timing provisioning
Result:
...................................................................................................................................................................................................
Click
4
Result:
...................................................................................................................................................................................................
Set the Timing Mode. In case of a re-timed value, set also the Fallback Mode and the
5
Acceptance QL values. (More information on re-timing can be found in the "Section:
Timing Concepts".
...................................................................................................................................................................................................
Set the Timing Alarm Reporting values.
6
...................................................................................................................................................................................................
Click
7
Result:
<XXX> Port Retiming Information window disappears.
...................................................................................................................................................................................................
Click
8
Result:
...................................................................................................................................................................................................
To set another 1.5 Mbit/s, 2 Mbit/s or X.21 port go to step 2, else go to step 9.
9
...................................................................................................................................................................................................
Click
10
Result:
E
N D
...................................................................................................................................................................................................
Provision STM-N Output Port Timing
To set the parameters for the physical STM-N output ports follow this procedure:
...................................................................................................................................................................................................
Select Provisioning --> Transport --> Ports.
1
Result:
...................................................................................................................................................................................................
Select an STM-N port from this list and click
2
Result:
...................................................................................................................................................................................................
Click
3
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
The < XXX> Port Retiming Information window appears.
Edit
.
The Edit < XXX> Port Retiming Information window appears.
OK
to confirm the current settings.
Depending on the chosen values a warning message can appear. The Edit
OK.
The < XXX> Port Retiming Information window disappears.
Close.
The Provisioned NE Port Information List window disappears.
O F
S T E P S
The Provisioned NE Port Information List window appears.
The Port Timing Information window appears.
Edit
.
Alcatel-Lucent - Proprietary
Timing
See notice on first page
Provisioning output port timing
.
7-45