Alcatel-Lucent 1643 AMS User's Operation Manual page 458

Access multiplexer and access multiplexer small (formerly metropolis am and metropolis ams) release 1.0 through 7.2
Hide thumbs Also See for 1643 AMS:
Table of Contents

Advertisement

Traffic provisioning
• provision the WAN port capacity and the monitoring mode of the SDH channel
• create a VLAN
• provision the Quality of Service (QoS) on the LAN and WAN ports.
Important! TransLAN always advertises to transport untagged traffic in
IEEE802.1D/Q mode, for preservance of e.g. end customer Bridge PDU traffic. For
this purpose, the TransLAN network will assign a default VLAN id (PVID) that is
used only internally to securely transport untagged customer traffic. This PVID is
attached at the ingress port, and removed at egress. Therefore it is not allowed to
send traffic to the TransLAN network that is already tagged with the same VLAN
as the default PVID used in the TransLAN network for this end customer. This
traffic will inevitably be untagged, and might not be useable anymore for the end
customer.
Create a virtual switch
...................................................................................................................................................................................................
Select
1
Result:
...................................................................................................................................................................................................
Click
2
Result:
...................................................................................................................................................................................................
Enter a name of maximum 20 characters in the
3
example Sales).
...................................................................................................................................................................................................
Select Spanning Tree in the
4
...................................................................................................................................................................................................
5
Select TPID value in the
It is recommended only to provide one of the following two values:
0x8100
for IEE802.1Q STP
0x9100
for IEEE802.1ad STP (provider bridge mode)
...................................................................................................................................................................................................
Select the virtual switch and click
6
Result:
...................................................................................................................................................................................................
Click
7
....................................................................................................................................................................................................................................
8-106
Provisioning
LAN Management
The
Virtual Switch List
.
Add
The
Add Virtual Switch
Ether Type
The
Virtual Switch List Information
.
Edit
Alcatel-Lucent - Proprietary
Provisioning a virtual switch in spanning tree mode
Virtual Switch
window appears
window appears.
Virtual Switch Label
Operation
Mode area.
area.
Details
.
See notice on first page
.
field (for
window appears.
365-312-807R7.2
Issue 4, May 2007

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1643 am

Table of Contents