Alcatel-Lucent 1643 AMS User's Operation Manual page 361

Traffic provisioning
The following table shows the names of the termination points.
Unit
Line 1 and Line 2 (STM-1
or STM-4)
Tributary 1 (2 Mbit/s)
Tributary 2 (1.5 Mbit/s)
Tributary 2 (2 Mbit/s)
Tributary 2 (34/45 Mbit/s)
Tributary 2 (X.21)
Tributary 2 (Ethernet)
Tributary 2 (STM-1)
Alarms
The cross connections can only be created at one network element at the same time. If
the termination points are monitored this will cause the following alarms:
VC-4/VC3/VC12 unequipped and TU3/TU12 Loss Of Pointer. Therefore first provision
the complete transmission path and then set the ports and termination points to
monitored.
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
TP Type
TU-12/TU-3
VC-12
VC-11
VC-12
VC-3
VC-12
VC-12/ VC3
VC-4
Alcatel-Lucent - Proprietary
See notice on first page
Cross Connections
TP name
LP1.1,1.[klm] and LP2.1,1.[klm]
TP1.1 - TP1.16
TP2.1 — TP2.16
TP2.1 - TP2.16
TP2.1 - TP2.2
TP2.1 ... TP2.4
LAN2.1 ... LAN2.4
TP2.1 — TP2.2
8-9