Parameters For Viewing Or Editing Node Details - Alcatel-Lucent 1643 AMS User's Operation Manual

Equipment provisioning

Parameters for viewing or editing node details

...................................................................................................................................................................................................................................
NE name
The network element's name is listed. The name must be unique across management
domains. If the NE is not managed by the ITM-NM, then the name may be up to 20
characters in length. If the NE will be managed by the ITM-NM, then the name must
be 3 to 10 characters long with the last three characters a slash and two digits. Only
A-Z, 0-9, _, /, and - are permitted for network elements managed by the ITM-NM. An
example of an ITM-NM compatible name is LONDON/02.
NE location
The location of the network element is given. The location may have up to 20
uppercase or lowercase characters, digits, and spaces.
MIB state
The status of the MIB is indicated. The possible values are given in the table below.
MIB State
Empty
Filled
Filled Unknown
Filled Not
Confirmed
Waiting for Upload
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Description
An empty system controller (SC) has been inserted or the MIB
was cleared after starting an MIB download by the management
system. If the MIB State is empty, the management system can
proceed with the MIB download.
The NE possesses a valid MIB, which has been confirmed.
The NE has a MIB, however, it is of unknown validity. This can
occur, for instance, if one SC is replaced by another SC having a
MIB.
The NE has a MIB, however, it has not yet been confirmed by
the ITM-CIT or ITM-SC. The procedure "Confirm or Update
MIB" gives the steps necessary to confirm the MIB. Once
confirmed the state will become Filled.
This state is only possible when the NE is managed by the
ITM-SC. After confirmation of the MIB, the NE performs a reset
and loses its association with the ITM-SC. when the NE restarts,
the MIB State becomes Waiting for Upload. When the ITM-SC
reassociates with the NE and detects this MIB state, an MIB
upload is performed, and the state will then become Filled.
Alcatel-Lucent - Proprietary
See notice on first page
5-49