Alcatel-Lucent 1643 AMS User's Operation Manual page 655

11 11 MIB Upload/Download
Overview
...................................................................................................................................................................................................................................
Purpose
This chapter describes the procedures to be carried out for a NE which will support
MIB upload and download by the MIB Upload/Download protocol.
It is possible to upload/download all the MIB data stored in the NE flash memory. The
MIB upload is only possible when the MIB is in mibFilled or mibWaiting for Upload
state. It is possible to download the MIB to the NE no matter what the current MIB
state is. Before the MIB download, the user shall be informed to do a MIB upload and
a user confirmation is needed to start a MIB download.
After the MIB is downloaded, user confirmation is needed to restart the NE with the
new downloaded MIB. When doing MIB download, the PC shall validate the SW item
code of the NE software and the MIB image. Only the SW item code with the same
Info Model structure is allowed to be downloaded.
Contents
MIB Upload to the ITM-CIT (Backup & Restore of MIB image via
Q-LAN & PC)
MIB Download on a network element (Backup & Restore of MIB image
via Q-LAN & PC)
To Edit the Node name in the MIB image
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
11-2
11-4
11-6
11-1