Removing Provisioning And Equipage From The Lnw705 And Lnw785 - Alcatel-Lucent 1665 Installation Manual

WDMX setup and testing: integration procedures
............................................................................................................................................................................................................................................................
Removing provisioning and equipage from the LNW705 and
LNW785
Description
This section provides procedures on how to properly remove provisioning from the
Alcatel-Lucent 1665 DMX shelf once testing is completed and the equipment/ports are no
longer needed. Locate the procedure below to remove the equipment and return the
Alcatel-Lucent 1665 DMX back to the original status.
Deleting the OCH cross-connection
........................................................................................................................................................................................................................
1
Login to the Alcatel-Lucent 1665 DMX using the WaveStar
........................................................................................................................................................................................................................
2
Retrieve OCH Cross-connections.
Select View --> OCH Cross-connections from the System View
........................................................................................................................................................................................................................
3
Click the "+" next to OMD5/8 circuit pack to expand the list.
Record the list of ports to be used when deleting OCH cross-connections. If there are more
than one OMD5/8 circuit packs installed, click on the "+" next to the others to document
the list of OCH cross-connection for the remaining circuit packs.
........................................................................................................................................................................................................................
4
Delete OCH Cross-connections
Select Configuration --> OCH Cross-connections from the System View
........................................................................................................................................................................................................................
5
Select the Delete an existing OCH cross-connection radio button in the OCH Cross-
Connection Wizard. Click Next.
........................................................................................................................................................................................................................
6
Click the "+" next to OMD5/8 circuit pack to expand the list
........................................................................................................................................................................................................................
7
Highlight one of the OCH cross-connections from the list recorded in
Next.
........................................................................................................................................................................................................................
8
Highlight All Legs and click Next, Finish, then Yes.
............................................................................................................................................................................................................................................................
7 - 1 6
Removing provisioning and equipage from the LNW705 and
®
CIT.
LNW785
Step 3 and click
365-372-304R7.1
Issue 2 March 2008