Alcatel-Lucent 1643 AMS User's Operation Manual page 652

Performance monitoring
Result:
...................................................................................................................................................................................................
In order to create an Ethernet service route for RTD measurements, click
5
Result:
Edit an existing Ethernet service route: To modify the configuration parameters of
an existing Ethernet service route for RTD measurements, select the desired
Ethernet service route in the Round Trip Delay Measurements window and click
Edit
...................................................................................................................................................................................................
Click
6
measurements by selecting the desired Ethernet service route in the Round Trip Delay
Measurements window.
Result:
...................................................................................................................................................................................................
To define the Ethernet service route, provision the parameters of the RTD test frame:
7
Parameter
Label
Destination Address
Test Frame VLAN ID
Test Frame Traffic Class
Test Frame Color
Test Frame Length
....................................................................................................................................................................................................................................
10-70
The Round Trip Delay Measurements window appears.
The Add RTD Ethernet Service Route window appears.
. The Edit RTD Ethernet Service Route window appears.
to modify the parameters of an existing Ethernet service route for RTD
Edit
The Edit RTD Ethernet Service Route window appears.
Alcatel-Lucent - Proprietary
Description
A user-provisionable name identifying the
Ethernet service route. The label may
consist of up to 20 ASCII characters.
The MAC address of the remote NE. The
value must be a unicast MAC address.
The VLAN identifier to be encoded in the
S-tag (outermost tag) of the test frame for
the RTD measurement.
The permissible value range is [1 ...
4093].
The traffic class to be assigned to the test
frame. Possible traffic classes are 0, 1, 2,
or 3
The color (dropping precedence, encoded
in the p0 bit) to be assigned to the test
frame. Possible values are green (low
dropping precedence) or yellow (high
dropping precedence).
The length of the test frame. The length
may vary between 64 and 9220 bytes for
the X5IP card and the length may vary
between 64 and 1650 for the X4IP-V2
card.
See notice on first page
Enable round trip delay measurements
Add.
365-312-807R7.2
Issue 4, May 2007