Create New Or Modify Existing Dcc Terminations - Alcatel-Lucent 1643 AMS User's Operation Manual

Management communication setup

Create new or modify existing DCC terminations

...................................................................................................................................................................................................................................
When to use
Use this procedure to create new or modify existing DCC terminations.
Related information
For related information, please refer to:
•
"Concepts" (p. 4-3)
Before you begin
Prior to performing this task, you must have an overview of the current network
topology.
Furthermore, you must:
1. log into the ITM
2. connect to the NE.
Required equipment
The following equipment is required to perform this task:
• ITM
Instructions
Complete the following steps to create a new DCC termination or to modify an
existing DCC termination.
...................................................................................................................................................................................................
Select
1
Result:
...................................................................................................................................................................................................
In the
2
termination or to modify an existing DCC termination.
Click on
Result:
...................................................................................................................................................................................................
In the
3
by selecting the respective radio button.
...................................................................................................................................................................................................
In the
4
NETWORK-SIDE
...................................................................................................................................................................................................................................
4-34
®
CIT, and
®
CIT
→
Management Overlay Comms Networks
The window is displayed.
DCC list
DCC list window select the port for which you want to create a new DCC
Edit .
The Edit DCC window is displayed.
window either enable or disable DCC termination for the selected port
Edit DCC
group box, choose the
LAPD Side
by selecting the respective radio button.
Alcatel-Lucent - Proprietary
LAPD Role
See notice on first page
→
from the main menu.
DCC
(either
USER-SIDE
(default) or
365-312-807R7.2
Issue 4, May 2007