Alcatel-Lucent 1643 AMS User's Operation Manual page 494

Traffic provisioning
SVID=
S-VID
S-VID is the VLAN ID of a S-tag. S-tag is the server tag (tag used by the provider
only).
For any S-VID defining a virtual port, the system allows you to provision the
following
• Possible values: 1, 2, 3, ..... 4093, RANGE(), ENUMERATION(), all
S-UP
S-UP is the user priority of the server tag S-tag.
Possible values: 0, 1, 2, 3, 4, 5, 6, 7, MASKx
Default value: all
Provisioning constraints
The following constraints apply:
• Allowed values for a FIT assigned to a customer role port: no Virtual port
descriptor (
• Allowed values for a FIT assigned to a network role port: S-Tag (S-VID; S-UP) ]
• Default values for a FIT assigned to a customer role port: none
• Default values for a FIT assigned to a network role port: no default value
• Customer role ports with 'QoS_portmode = Flow_Configuration' have exactly one
VPD assigned.
• Network role ports with 'QoS_portmode = Flow_Configuration' have one or more
VPDs assigned.
• None of them shall be 'VPD = no_virtual_port..
• The port is converted from a DiffServInt port to a DiffServEdge port at the
moment when the QOS_portmode is set to 'Flow_Configuration'.
• Be aware that all VPDs of a physical network role port need not cover all possible
S-VID / S-UP combinations.
• Be aware that all defined S-VID / S-UP combinations shall be unique.
• The number of ports having 'VPD = S-Tag()' shall be restricted to max. 4, if the
number is not otherwise even more restricted.
Flow Descriptor (FD)
For each customer role port one Flow Identification Table (FIT) can be assigned. For
each virtual port one Flow Identification Table (FIT) can be assigned. A FIT is
structured in lines. Each line allows to enter a Flow Descriptor.
For any FIT, the system shall allow the user to add or delete the last-but-1'th Flow
Descriptor.
....................................................................................................................................................................................................................................
8-142
&&SUP=
<value> <value>
)
VPD
Alcatel-Lucent - Proprietary
Parameters for provisioning Flow Identification Tables
x
2 1
See notice on first page
x , all ]
0
365-312-807R7.2
Issue 4, May 2007