Alcatel-Lucent 1643 AMS User's Operation Manual page 644

Performance monitoring
Result:
...................................................................................................................................................................................................
In the Select Port Role window select Customer Port and click Next.
5
Result:
...................................................................................................................................................................................................
In the Edit Port Information window set the PVID, select Default Profile for QOS
6
Mode and click
...................................................................................................................................................................................................
Click Add Flow Table.
7
Result:
...................................................................................................................................................................................................
Set the Descriptor to none and click
8
Result:
...................................................................................................................................................................................................
In the Customer Port Information window click Insert Flow Group.
9
Result:
...................................................................................................................................................................................................
Set the Descriptor to cvid=1&&cup=0 , set the Profile ID and click
10
...................................................................................................................................................................................................
In the Edit Port Information window select Flow Configuration for QOS Mode, click
11
Ok and
...................................................................................................................................................................................................
Select
12
Result:
Configuration mode.
...................................................................................................................................................................................................
Select
13
Group ID from the drop down list and then click
Result:
Point List
...................................................................................................................................................................................................
Click
14
....................................................................................................................................................................................................................................
10-62
The Select Port Role window appears.
The Edit Port Information window appears.
Ok .
The Add Flow Table window appears.
The Flow Table is added.
The Insert Flow Group window appears.
Close .
→
Performance PM TP Configuration
The Select Performance Monitoring Points window appears in the PM
Flow TP for PM Point Type, select the Port, select the Flow Table ID and Flow
The Service Monitor
window.
Add
.
Alcatel-Lucent - Proprietary
.
Ok
.
is enabled in the
See notice on first page
Ethernet Service Monitor
Ok
Add Ok
and .
Active Performance Monitoring
.
365-312-807R7.2
Issue 4, May 2007