Conventions Used - Alcatel-Lucent 1643 AMS User's Operation Manual

About this information product
Examples of traffic maintenance tasks are:
– Set termination points to be monitored
– Create Traffic Ports, both physically and logically
– Create Termination points
– Verify the path using trail trace
– Set the signal degradation threshold for the path (the signal degradation
– Switch the protection of the path
– Verify the protection path using trail trace.
• Performance monitoring. The provider performs Performance Monitoring in order
to detect flaws early on, before the alarms arise.
This chapter enables the user to:
– Create a monitoring point
– Write performance data to another medium
– Retrieve performance data from the NE.
• Engineering order wire and user channel provisioning. This chapter allows the user
to view/create/modify the engineering order wire and the user channels.
• Software upgrade.
This chapter allows the user to:
– Find out what software versions are loaded in the network element
– Download a new software image
– Check whether software download was successful
– Switch stores.
• Concepts. The concepts chapter(s) contains all knowledge information. The user
can use this chapter(s) when they do not understand a task.
• ITM-CIT tutorial. In this chapter, the user learns how to operate the user interface.
For example:
– View alarms
– Acknowledge alarms
– Display alarm reports
– Workstation installation
– Workstation operation.
• Back matter: Glossary and Index

Conventions used

These conventions are used in this document:
...................................................................................................................................................................................................................................
xxiv
thresholds determines whether or not to generate an alarm and whether or not a
protective switch will take place)
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
,