Alcatel-Lucent 1643 AMS User's Operation Manual page 582

Traffic maintenance
Values
Manual Switch to working
Manual Switch To Protection
Forced Switch To Working
Forced Switch to protection
....................................................................................................................................................................................................................................
9-30 Alcatel-Lucent - Proprietary
See notice on first page
Parameters for switching MSP protection
Description
Switch request which
conditionally switches
service to the working TP.
In case a failure is
detected an automatic
switch will take place to
the protection TP. This
switch request only exists
in non-revertive mode.
Switch request which
conditionally switches
service to the protecting
TP. In case a failure is
detected an automatic
switch will take place to
the working TP.
Switch request which
enforces switching service
to the working TP. It
prevents automatic
switching to the protecting
TP even in case a failure is
detected. This switch
request only exists in
non-revertive mode.
Switch request which
enforces switching service
to the protecting TP. It
prevents automatic
switching to the working
TP (only if the switch
request has a higher
priority than the protection
group state).
Issue 4, May 2007
365-312-807R7.2