Alcatel-Lucent 1643 AMS User's Operation Manual page 635

Access multiplexer and access multiplexer small (formerly metropolis am and metropolis ams) release 1.0 through 7.2
Hide thumbs Also See for 1643 AMS:
Table of Contents

Advertisement

Performance monitoring
Measurements
Only active if one selection is made in the list. Opens Performance Monitoring
Measurements. More than one instances of measurement can be open at the same time
by selecting Points on the list and pressing Measurements.
Monitored parameter
Lists the measurement parameters and their values, which are being monitored.
pDe
LAN measurement parameter for Total_number_of_packets_droped. It represents the
incoming packet which is not to be handed over to switch because of format error of
any kind.
PM point type
Displays a list from which you can select a monitorable and available point on the unit
card. Changing the point type filter will dynamically re-populate the slot and port
combo-boxes, as well as enabling the third field where the layer filter for cross
connections or LAN interconnections must be further defined.
Port VC4
Displays a list of VC4 (VC-4-4c, VC-4-16c) ports available on the selected slot. The
default is greyed out and empty. Displays the selection of VC4s after slot is selected. If
all slots are selected, then all ports VC4 is the only choice possible in this field. The
All value is only possible if the originating screen is Active Performance Monitoring
Points, and not when it is Edit Performance Monitoring Point.
Start time
Displays a list of from which you can select a monitorable and available point on the
unit card. Changing the point type filter will dynamically re-populate the slot and port
combo-boxes, as well as enabling the third field where the layer filter for cross
connections or LAN interconnections must be further defined.
Slot
Displays a list of (virtual) slots in the system that contain possible monitoring points,
matching the selected PM Point Type. The default is empty and greyed out. A Point
Type must be selected to make selection possible in this field.
Stop time
Displays the elapsed time since the start of the current bin accumulation till the last
update of this screen.
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
Parameters for displaying PM data
10-53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1643 am

Table of Contents