Alcatel-Lucent 1643 AMS User's Operation Manual page 452

Traffic provisioning
Result:
...................................................................................................................................................................................................
CAUTION
10
Uncareful Change of TransLAN application mode can result in undefined operation. In
a specific case, switching from IEEE tagging mode (Spanning Tree Switch) to VPN
mode (double tagging/transparent), this can result in a crash of the pack.
A 'graceful shutdown' of the configuration of the TransLAN network is then required to
ensure proper operation:
1. Remove cross-connection for all affected TransLAN NEs
2. Remove VCGs
3. Delete virtual switches
4. Change mode
5. Create virtual switches
6. Create VCGs and WAN ports
7. Provision VLANs, PVIDs, CIDs, assign ports etc.
8. Re-create cross-connection.
In the
• the
mode, also known as double tagging or VPN tagging.
Note:
• the
standard VLAN tagging mode.
The usage of the tagging modes is described in
(p. 8-58).
Click
Result:
information for this unit.
...................................................................................................................................................................................................
Click on
11
Result:
...................................................................................................................................................................................................
From the ITM CIT main menu, select
12
Result:
...................................................................................................................................................................................................
In the
13
.
....
....................................................................................................................................................................................................................................
8-100
The
Edit LAN Unit Information
Edit Lan Unit Information
Transparent radio button, if you want to run the unit in transparent tagging
X5IP does not support Transparent tagging mode.
IEEE 802.1Q / IEEE 802.1ad
OK.
The
LAN Unit Information
Close
The
LAN Unit Information
The
SDH channel / VCG List
SDH channel / VCG List
Alcatel-Lucent - Proprietary
window is opened.
window select either:
radio button, if you want to run the unit in
"Virtual Switch operation mode "
window is now populated with new
window is closed.
Provisioning
window opens.
window select the respective port and click on
See notice on first page
Provisioning Ethernet services
→
LAN Management
→
VCG
Details
365-312-807R7.2
Issue 4, May 2007