Alcatel-Lucent 1643 AMS User's Operation Manual page 471

Traffic provisioning
STP root cost
Indicates the cost of the path to the root as seen from the Virtual Switch. This will be
displayed in s/20 Tb.
STP root port
The root port used for spanning tree algorithm.
Tagging mode
The tagging mode of the LAN unit configured as Repeater is transparent. The tagging
mode of the LAN unit configured as Spanning Tree is IEEE802.1Q.
VCG name
The name of the VCG associated with the WAN port is fixed: VCG2.x, where VCG2
refers to the slot and x is the number of the VCGl. This is the same number as the
WAN port associated to the VCG.
Virtual switch
A Virtual Switch is a set of LAN/WAN ports on a TransLAN
used by different VLANs which can share the common WAN bandwidth.
Virtual switch name
The name of the Virtual Switch as described in the port naming scheme document.
Virtual switch label
The label given to the Virtual Switch by the user when the Virtual Switch was created
via the "Create/Edit Virtual Switch" screen. The label is a character string up to 20
characters long.
VLAN version number
The VLAN Version Number this only has one possible value 'IEEE Std 802.1Q - 1998
Edition'.
VLAN ID max
On each unit (pack), the MAX VLAN number is 64 (GVRP enabled) or 100 (GVRP
disabled) with 2000 VLAN associated ports. Given that the X4IP unit can support
VLANs of at most 8 ports, the worst case upper limit for the 1643 AM/1643 AMS is
2000/8 = 250 VLANs.
VLAN ID
The unique ID for the VLAN. The ID is an integer between 1 and 4093.
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Parameters for provisioning LAN unit in spanning tree
Alcatel-Lucent - Proprietary
See notice on first page
®
option board that are
mode
8-119