Alcatel-Lucent 1643 AMS User's Operation Manual page 274

Alarm management
Alarm identifier
"Probable cause"
UPUS
X21XcEQF
X21XcWUP
X21XcUNI
X21XcUPF
Notes:
1. Alarms marked with an asterisk ("*") in the "Probable cause" column are not supported
in the present 1643 AM release. These alarms are prepared for future applications.
mdi ASAP
The following table lists the default alarm severity assignments of the "mdi" ASAP.
Alarm identifier
"Probable
cause"
1
MDcIP1
MDcIP2
MDcIP3
MDcIP4
RPSMDcIP1
RPSMDcIP2
RPSMDcIP3
Notes:
1. In the ITM CIT
environmental alarm.
2. You can change the alarm text of each individual Miscellaneous Discrete Input (MDI).
....................................................................................................................................................................................................................................
6-50
Alarm text
Unit present in unassigned slot
X.21 interface extension board - defective
Wrong X.21 interface extension board
inserted
X.21 interface extension board missing
X.21 interface extension board - defective
2
Alarm text
MDI 1: <user entered string>
MDI 2: <user entered string>
MDI 3: <user entered string>
MDI 4: <user entered string>
MDI 1 located on the remote power supply box -
indicates an environmental alarm condition
MDI 2 located on the remote power supply box -
indicates an environmental alarm condition
MDI located on the remote power supply box -
indicates an environmental alarm condition
NE Alarm List , only "MISC" is displayed as the probable cause of an
Alcatel-Lucent - Proprietary
See notice on first page
Alarm Severity Assignment Profile
Alarm Reporting state
severity (default setting)
Information Reported
Prompt Reported
Prompt Reported
Prompt Reported
Prompt Reported
Alarm Reporting state
severity (default setting)
Information Reported
Information Reported
Information Reported
Information Reported
Deferred Reported
Deferred Reported
Deferred Reported
365-312-807R7.2
Issue 4, May 2007