Alcatel-Lucent 1643 AMS User's Operation Manual page 565

Traffic maintenance
When monitored, alarms are generated related to the selected termination point. When
not monitored, no alarms are generated related to the selected termination point.
For TU-12 and TU-3 the TP mode cannot be set by the operator. For TU-12 and TU-3
alarming is 'enabled' once such TP is in use (i.e. Cross-connect is made to such TU).
J0/J1/J2 trail trace identifier
This area is used to provision a path trace. Provisioning a path trace is described in the
section "Path Trace Provisioning".
Signal label
The signal label is part of the path overhead of a VC-n signal and indicates what type
of signal is carried by the container.
Example: Unequipped, asynchronous, TUG structure, ATM
• Signal Label Accepted (HEX., Description) is the signal label of the received signal
• Signal Label Transmit (HEX., Description) is the signal label of the transmitted
signal
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
Parameters for provisioning termination points
9-13