Parameters For Viewing Sfp Inventory Data - Alcatel-Lucent 1643 AMS User's Operation Manual

Equipment provisioning

Parameters for viewing SFP inventory data

...................................................................................................................................................................................................................................
Selection
Displays the selected pluggable module.
Administrative State
Displays the administrative state of the pluggable module
The following values are possible:
• module accepted,
• module rejected,
• module allowed,
• module not present
Displayed SFP inventory data
The following inventory data is shown for the displayed component:
Information
Physical Identifer
Connector Type
Transceiver Code
Revision Number
Vendor Serial Number
Com Code
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Meaning
SFP transceiver or unspecified
The Connector Type is displayed (Example: LC).
If this attribute is not available from the NE, an
empty string is displayed.
The Transceiver Code is contained in the
EEPROM of the SFP. If this attribute is not
available from the NE, an empty string is
displayed.
A 4 byte character string, left aligned and padded
on the right with ASCII spaces. If this attribute
is not available from the NE, an empty string is
displayed.
This attribute represents the internal Serial
Number of the Vendor, which is not represented
on the label of the SFP and not linked to the
WES code. If this attribute is not available from
the NE, an empty string is displayed.
The Alcatel-Lucent Comcode is suffixed by '000'
in case a 9 digit number is used. If this attribute
is not available from the NE, an empty string is
displayed.
Alcatel-Lucent - Proprietary
See notice on first page
5-43