Parameters For Viewing Ne Slot Information - Alcatel-Lucent 1643 AMS User's Operation Manual

Equipment provisioning

Parameters for viewing NE slot information

...................................................................................................................................................................................................................................
Slot
The slot position is given here.
Actual unit
The unit physically present in the selected slot.
Expected unit
The type of unit provisioned in the listed slot is shown.
Slot state
Displays the status of the listed slot. The different slot states are given in the table
below.
Slot State
Assigned
Unassigned
Auto
Selected slot
Indicates the slot selected.
Operation
When assigning units, an operation must be chosen. The choices are detailed in the
following table.
Slot State
Assign
Unassign
Auto
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Description
Slot is assigned.
Slot is unassigned.
Slot is provisioned but waiting for unit. Once the provisioned unit
is present, the slot state will automatically change to Assigned.
Description
Assigns the unit to the slot.
The slot is configured to be empty. The NE will not expect any
unit to be present in this slot.
Automatically assigns the unit to the slot once the NE establishes
the presence of a unit of the correct type. Until this time, the slot
acts as unassigned.
Alcatel-Lucent - Proprietary
See notice on first page
5-31