Alcatel-Lucent 1643 AMS User's Operation Manual page 533

Traffic provisioning
Parameters for viewing or editing NTU information and VC 12
termination point information
...................................................................................................................................................................................................................................
Accepted TSL (Hex, Description)
The received SL. Hex, Value, and Description (read only). Greyed out and empty when
the accepted TSL does not have the value "Normal".
Accepted TSL Value Status
Shows the accepted TTI Value Status (read only).
Accepted TTI Value Status
Shows the accepted TTI value status (read only).
AIS on PLM
When checked the AIS insertion on PLM detection is enabled (editable).
AIS on TIM
When checked the AIS insertion on TIM detection is enabled (editable).
API
The API which is inserted in the transmit direction. Greyed out and empty if the TI
mode is set to the non-specific byte mode (editable).
API Display Mode
Greyed out if the corresponding "API" field is greyed out.
LTU port
Displays the port name of the connected LTU port (read only).
NTU port
Displays the port name of the connected NTU port (read only).
Issue Number
Displays the vendor issue number of the NTU device(read only).
Node Name
Displays the name of the NTU device (editable).
Serial Number
Displays the vendor serial number of the NTU device (read only)
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-181