Alcatel-Lucent 1643 AMS User's Operation Manual page 339

Timing provisioning
Important! Setting the priorities has only effect if Source Selection is set to
Independent. This can be done in the procedure "Switch Active Timing Source".
Make sure not to use the same priority value for multiple timing sources, unless
explicitly required by the timing plan.
...................................................................................................................................................................................................
Click
4
Result:
window disappears.
...................................................................................................................................................................................................
To provision another Timing Source go to step 2, otherwise go to step 6.
5
...................................................................................................................................................................................................
Click
6
Result:
disappears.
E
N D
...................................................................................................................................................................................................
Switch active timing source
To switch the timing source that is used as the active timing source for station clock
output timing, follow this procedure:
...................................................................................................................................................................................................
Select Provisioning --> Timing --> Output Timing.
1
Result:
appears.
...................................................................................................................................................................................................
Click
2
Result:
...................................................................................................................................................................................................
Select a request from the Request list. If a manual switch or a forced switch is
3
required, select also a timing source to switch to from the Timing Source list.
Important! A switch request can only be made if the Source Selection is set to
Independent.
...................................................................................................................................................................................................
Click
4
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
OK
to confirm the current settings.
The Edit Automatic Selection Criterions for NE STCLK Output Timing
Close
The Provisioned NE Station Clock Output Timing Information window
O F S T E P S
The Provisioned NE Station Clock Output Timing Information window
Switch
in the Active Timing Source field
The Switch Request and Source Selection window appears.
OK
to confirm the current settings and send the request to the network element.
Alcatel-Lucent - Proprietary
.
See notice on first page
Provisioning station clock output
7-37