Vertex M
24-Point Continuous Monitor
TM
1.1 System Overview
The Honeywell Analytics Ver tex M™ System
continuously monitors up to 24 remote locations
for toxic gases. It responds to gases that exceed
programmed levels by:
•
Triggering alarms and opening event windows
to warn operators of high or low concentrations
•
Triggering relays to external devices
•
Displaying the location, gas type and gas
concentration
•
Storing the alarm information in a database
The Vertex M System provides fast response to a wide
range of gases. Each location may be up to 400 ft
(122 m) from the Vertex M System. The system uses
one or more of Honeywell Analytics' Chemcassette
analyzers, with or without pyrolyzer, to provide a
monitoring system tailored to meet the requirements
of the facility.
The Vertex M System incorporates a range of redundant
and protective features for maximum uptime:
•
Intelligent analyzer modules allow one to stop
monitoring with no effect on the remaining
modules
•
Power supplies are redundant
•
Pumps are redundant
•
The system powers up in the same state as
when powered down
Section 1 - Introduction
•
Filters, Chemcassettes
components in one of the analyzers can
be replaced while the remaining analyzers
continue to function
Operation can be through an LCD touch screen or
through a local area network (LAN).
Chemcassette
is a registered trademark of Honeywell Analytics, Inc.
®
1.1.1 Manufacturer
The Vertex M System is manufactured by:
Honeywell Analytics Inc.
405 Barclay Boulevard
Lincolnshire, IL 60069 USA
www.honeywellanalytics.com
1.1.2 General Safety
®
Follow all installation and operational instructions to
ensure the safe and reliable operation of this unit.
If this monitor is used in a manner not specified by
Honeywell Analytics Inc., the protection provided by
the equipment may be impaired.
1.2 System Components
The following photos illustrate Vertex M System
components, ports, connections and controls. From
the main front and back photos, click on the labels to
see the detail photos.
1-2
and major
®