Point Detail Display Area - Honeywell Vertex M Technical Handbook

Vertex M 24-Point Continuous Monitor
TM

4.3.2 Point Detail Display Area

The Point Detail Area (see Figure 4-1) displays
comprehensive information about each location.
Touching a block in the System Display Area displays
the current information about a location.
Config File The configuration profile file name
User ID The name of the current, logged in
user
Location The short name of the sampled
location
T i e r - S l o t - Points are identified by the tier, slot
Point
and their point number in which the
analyzer is installed
Point.
Points not needed for monitoring may
be disabled. A disabled point does not
trigger alarms
• See Section 4.5.4 Event List
• See Section 4.5.2 Data Trend
• See Section 4.5.1 Event History
Section 4 - Operation 4-8
Figure 4-1.