Table of Contents
Advertisement
Vertex M
24-Point Continuous Monitor
TM
Figure A-3. Configuration Editor New Button
Figure A-2. LIT Access
Pressing the "Line Integrity Test" button shown in
Figure
H-3
causes the form shown in
Figure H-4
to appear.
The three times displayed on the left of the new
tabsheet indicate the TWA times. (TWA times are set
on Data Logging tabsheet.)
The checkbox and labels on the right of the new page
will become black if any of the left-side checkboxes are
checked. Otherwise the right-side items will become
gray.
The checkmark itself indicates the status of the point-
specific checkboxes shown in Figure H-2. If the point-
specific LIT checkboxes are all set, this checkmark
will be set.
Appendix A - Line Integrity Test Option
H-4
Advertisement
Chapters
Table of Contents
