Diagnostics - Honeywell Vertex M Technical Handbook

Continuous gas monitor
Hide thumbs Also See for Vertex M:
Table of Contents

Advertisement

Vertex M
24-Point Continuous Monitor
TM
To Open Gate
Set analyzer to idle in the Runtime Options window.
1. Touch Main Screen, Menu, Maintenance then Analyzer Operations.
2. Touch the module number on the module keypad.
3. Select Gate Open.
4. When finished, press Gate Close and return analyzer to monitor mode in Runtime Options
window.4.6.4 Diagnostics

4.6.4 Diagnostics

Use the Diagnostics Window to review operational settings and information about either an individual analyzer
or the Vertex M System. To open the Diagnostics Window, touch Menu and then Diagnostics.
System Information - Displays the profile ID number, Profile name and other critical system
information.
The Profile ID is a unique number generated whenever the Vertex M Profile Management utility saves a
configuration file. Vertex M stores the ID number in the DAq, the PLC and each analyzer. If the profile ID numbers
do not match, a fault is generated and monitoring will not start.
Section 4 - Operation
4-41

Advertisement

Table of Contents
loading

Table of Contents