Honeywell Vertex M Technical Handbook page 199

Vertex M 24-Point Continuous Monitor
TM
A.1 Network Interface and Options
Network interface options currently available on Vertex
M are:
Standard:
• OLE for Process Control (OPC) Interface. See
Section A.2 OLE for Process Control (OPC)
Interface.
Options:
The Vertex M can be fitted with any one of six optional
fieldbus interfaces as summarized in Table F-1.
Table A-1. Vertex M Fieldbus Options
Protocol
Name
Profibus - DP
DeviceNet
ControlNet
DF1
ModBus Plus
LonWorks
Modbus/TCP
Ethernet/CIP
* Part Number obsolete
CAUTION
Do not install routers between the optional PLC fieldbus
networks and the internet. These networks are not de-
signed to resist cyberattack so their cabling must have
rigorous physical isolation from malicious traffic.
Appendix A - Network Interface and Options
Honeywell
Analytics part
number Section
1295-0275
1295-0329
1295-0394*
1295-0343
1295-0330
1295-0328 F10
1295-0520 F11
1295-0519 F12
Optional Remote Display Software.
The Vertex M can be ordered with an optional remote
display capability as described in
M Remote Display Setup
F5
F6
F7
F8
F9
F-2
Section A.13 Vertex