Honeywell Vertex M Technical Handbook page 205

Vertex M 24-Point Continuous Monitor
TM
Folder Tag Count
Maintenance 0
CFilter 9
Reset 0
Monitor 9
SGas_Name 72
Unit 72
Note:
The Vertex M uses the same OPC server as the Vertex. Thus numerous OPC tags exist for non-existent analyz-
ers. Tags for points greater than 24 or analyzers greater than 3 are not populated and invalid.
Appendix A - Network Interface and Options
Table F-3. Tag Names (continued)
Recommended
Tag Name
for most HMI
Format
systems
Az#FiltDaysLeft
Y Az#
##_1
##_1
Value Interpretation / Description
Integer, number of days until filters should be changed, equivalent to
"Filter Left" as displayed in Diagnostics/Anlyzer Info.
Integer monitoring state for entire analyzer , see table below
0 = Idle
1 = Pyrolyzer Warmup
2 = Monitoring
3 = Loading Chemcassette
4 = Loading new program
5 = Loading new configuration
6 = Flow auto-balance
7 = Performing Line Integrity Test
String gas name abbreviation, e.g. "AsH3"
String, either "ppm" "ppb" or "mg/m3"
F-8