Basic Desktop Station Setup; Installing Java Runtime Environment Software; Install Adobe Reader Software; Create Hmi Account - Honeywell Vertex M Technical Handbook

Continuous gas monitor
Hide thumbs Also See for Vertex M:
Table of Contents

Advertisement

Vertex M
24-Point Continuous Monitor
TM
that sets the IP (internet protocol) address of the rack
automatically. This number is necessary to establish
communication with the rack. The address is available
by running a command prompt, the "ipconfig" command
as shown in Figure 2. Note that the Vertex M has two
Ethernet interfaces: the address of "External_Ethernet"
is the relevant one, as shown in the image below.
Figure A-10. ipconfig Command
A.13.3 Basic Desktop Station Setup
This adapts a desktop computer for viewing the Niagara
HMI. In this basic configuration, event history and
data trend are available. But the following features are
unavailable remotely:
Chemcam viewer
Configuration editor
Event database export
Concentration trend database export
Appendix A - Network Interface and Options
A.13.3.1 Installing Java Runtime Environ-
ment Software
The Java runtime environment must be installed on the
desktop to view Niagara Racks. If this is not installed
on your PC, you must install it to use the virtual Vertex
M: Click on the Free Java Download button on the
webpage (http://www.java.com) and follow the prompts.
A.13.3.2 Install Adobe Reader Software
Adobe Acrobat Reader is needed to view this
Technical Handbook on the remote station. This
may be downloaded from www.adobe.com. Click on
<Get Adobe Reader> and follow the prompts.
A.13.3.3 Create HMI account
Creating multiple HMI accounts is useful to facilitate
using the HMI security system to control access to the
HMI's features. This is described in
the Vertex M Technical handbook. The default account
has the username "administrator" with the password
"administrator".
A.13.3.4 Starting the Niagara Remote Dis-
play
The Niagara remote display is presented in Microsoft
Internet Explorer, versions IE6 and IE7.
Type the Vertex M rack's IP address in the IE Address
bar to start the virtual Vertex M display. The address
must begin with http:// and must end with ":88" In the
example, the URL http://158.100.40.130:88 displays
the virtual Vertex M, shown in the following page. The
initial startup may take a few moments before the login
window appears.
F-22
Section 4.6.6
of

Advertisement

Table of Contents
loading

Table of Contents