Honeywell Vertex M Technical Handbook page 106

Vertex M 24-Point Continuous Monitor
TM
To Disable or Enable Alarms
Disabling alarms prevents the system from triggering false alarms during testing and maintenance.
1. Select the analyzer and point from the keypad. The selected points turn dark gray on the keypad.
2. Choose Selected Point Only to enable / disable an alarm on a single point
or
Choose All Points for Location to enable / disable all of the alarms associated with a location.
3. Touch Alarm Enable or Alarm Disable to change the state of the point. A disabled alarm turns light
blue. An enabled alarm turns green in the point status window.
Gas Point
or
Gas Location
Alarm Enable/
Disable
Section 4 - Operation
Point Status Window
4-30
Analyzer
Keypad
Alarm
Enable /
Disable
Screen