Configuration
This chapter includes descriptions about how to configuring the following:
•
•
•
•
•
Setup
Configuring the Camera Setup through the Remote Interface
If the NVR connects to an IP camera through a private protocol, then the Camera Conditions
page displays. If the NVR connects to an IP camera through the ONVIF protocol, then the
Camera Conditions does not display.
Configuring Camera Image Settings
In the Camera Conditions window, you can view the camera device properties. Any changes
are immediately active after you set them.
Click Camera under REMOTE to open the Conditions interface.
Camera setup
Network setup
Event settings
Storage
General settings, including the following:
•
the device's name and number
•
the interface language
•
the video standard
•
what happens when the HDD is full
•
the pack duration
3
3
800-21261V2 - A - 03/2016