Related Manuals for Honeywell HEN04112
Summary of Contents for Honeywell HEN04112
- Page 1 Performance Series Full PoE Network Video Recorder HEN04112 HEN08112 HEN16122 HEN04122 HEN08122 HEN16142 HEN04102 HEN08142 HEN16162 HEN08102 HEN16102 Remote User Guide Document 800-21261V2 – Rev A – 03/2016...
- Page 3 Remote User Guide...
- Page 4 Revisions Issue Date Revisions 08/2015 New document. (Based on 800-20017) V1 Rev A 10/2015 Added a note in the Configurations section, table 3-2. V2 Rev A 03/2016 Amended the list of NVR models.
-
Page 5: Table Of Contents
Contents | 5 Contents About This Document ..........Overview of Contents. - Page 6 Index ............101 www.honeywell.com/security...
- Page 7 Figures | 7 Figures Figure 1-1 IE Window ..........16 Figure 1-2 Controls Installation Popup Message .
- Page 8 Import/Export Interface ........88 www.honeywell.com/security...
- Page 9 Figures | 9 Figure 3-61 Default Settings Interface ........88 Figure 3-62 Upgrade Interface .
- Page 10 10 | Performance Series Full Poe Embedded NVR Remote User Guide www.honeywell.com/security...
- Page 11 Tables | 11 Tables Table 1-1 PC Requirements ......... . 15 Table 1-2 Viewer Configuration Controls .
- Page 12 12 | Performance Series Full Poe Embedded NVR Remote User Guide www.honeywell.com/security...
-
Page 13: About This Document
About This Document This document describes how to access Honeywell’s Performance Series Full PoE Network Video Recorder remotely using a browser-based web client. This document is intended primarily for remote users. Overview of Contents This document contains the following chapters: •... -
Page 14: Related Documents
Performance Series IP NVR Quick Connection Guide 800-21088 Performance Series IP NVR Quick Network Guide 800-21089 * These part numbers are subject to change. Please consult the Performance Series Full PoE Network Video Recorder product webpage for the latest versions of these documents. www.honeywell.com/security... -
Page 15: Logging In
Logging In This chapter includes: • PC requirements for the web client software • Logging in to the web client software • The web client software’s main page Preparing to Use the Device Web Client PC Requirements Table 1-1 PC Requirements Component Minimum Requirement Processor... -
Page 16: Logging In
Open a Web browser window. Note These instructions were created using IE. You can use Internet Explorer (IE), Safari, Chrome, or FireFox. Figure 1-1 IE Window Enter the IP address Enter the NVR IP address in the address field. www.honeywell.com/security... - Page 17 Logging In | 17 For example, if your NVR’s IP address is 192.168.1.108, then enter http://192.168.1.108 in the address field. A message pops up asking if you want to install controls. Figure 1-2 Controls Installation Popup Message Click Install to install the controls. Note The relevant plug-ins might be blocked by your web browser security settings.
-
Page 18: Lan Mode
For security, we recommend that you modify your password on your first log in. LAN Mode The LAN main window is divided into 4 main sections. See Figure 1-5. In LAN mode, you can select different channels and different modes at the bottom of the interface. www.honeywell.com/security... -
Page 19: Section 1: Function Buttons
Logging In | 19 Figure 1-5 LAN Mode Main Window Section 1: Function Buttons Figure 1-6 LAN Main Window Function Tabs There are six function tabs: • Preview: You are currently in the Preview (Live) mode, where you can see all these tabs. •... -
Page 20: Section 2: Monitor Channels And Function Buttons
Main Stream and Extra Stream - Navigate your mouse to a camera channel window to find the Main Stream and the Extra Stream. The Start All button enables/disables all channels in the real-time monitor. You can also select the Main Stream or the Extra Stream. www.honeywell.com/security... -
Page 21: Start Talk Button
Logging In | 21 Figure 1-8 Main Stream and Extra Stream Start Talk Button Figure 1-9 Start Talk Button Enabling Bi-Directional Communication Click to enable bi-directional communication. Click in the control panel on the right to select the bi-directional communication mode. There are four options for the communication mode: DEFAULT, G711a, G711u, and PCM. -
Page 22: Instant Record Button
Image and Alarm Configuration Panels Refer to the User Guide or see Configuring Image Settings on page 29 for more information about Image settings. Refer to the User Guide or see Alarms on page 95 for more information about Alarms. www.honeywell.com/security... -
Page 23: Section 4: Viewer Configuration Controls
Logging In | 23 Section 4: Viewer Configuration Controls Table 1-2 Viewer Configuration Controls Button Name Description Video Quality Click to select the video quality. Select either High quality or Low quality. Fluency Click to configure the fluency. Select from Fluency Level 1, Fluency Level 2, Fluency Level 3, Middle level, Latency Level 1, Latency Level 2, and Latency Level 3. -
Page 24: The Difference Between Lan And Wan
Sub stream. For one-channel live viewing, the Main Stream is used; for Multiple-channel viewing, the Sub Stream is used. In multiple-channel mode, all channels try to synchronize the time setting to the network, but the ability to synchronize depends on your network settings. www.honeywell.com/security... -
Page 25: Logging Out
Logging In | 25 Note Because of bandwidth limitations, the NVR system can not support monitoring and playback at the same time. To enhance search speed, the NVR system automatically closes the monitoring or playback interface when you are searching for recorded video in the configuration interface. Logging Out Click the Logout tab in the Main Menu. - Page 26 26 | Performance Series Full Poe Embedded NVR Remote User Guide www.honeywell.com/security...
-
Page 27: Live Viewing
Live Viewing This chapter includes: • A description of the NVR web client. • Descriptions of image/relay output settings, including image settings. • Descriptions of the Information available for viewing in live view, including system version, log, connection log, and online user information. Live Viewing Left-click a channel name in Section 2, the Monitors Channel section, to select that channel for viewing. - Page 28 When you click the Local Record button, the system/NVR begins recording. The recorded file is saved to the default system folder: \RecordDownload. Snapshot Click to take a snapshot of the currently viewed video. All images are saved to the default system folder: \picture download. www.honeywell.com/security...
-
Page 29: Image/Relay-Out Settings
Live Viewing | 29 Table 2-2 Live View Video Window Controls Control Description Audio Turn audio On or Off. Note This control has nothing to do with the system audio setup. Close Window Close video in the current window. Image/Relay-out Settings Configuring Image Settings Here you can adjust the selected channel’s brightness, contrast, hue, and saturation. -
Page 30: Information
Here you can view the recording channel, the alarm input/output information, the software version, and the release date. None of these values can be changed; they are viewable only. Click Log in the System menu to open the Log configuration interface. www.honeywell.com/security... -
Page 31: Connection Log
Live Viewing | 31 Figure 2-4 Log Configuration Interface Table 2-4 Log Configurations Configuration Description Start Time Set a start time for the log. End Time Set an end time for the log. Type Select from System Operation, Configuration Operation, Data Operation, Event Operation, Record Operation, User Management, Log Clear, and All. -
Page 32: Online User
Set a Start and End Time, select a Channel. Click Search to find the connection log. Online User Click Online User in the System menu to open the Online User interface. Figure 2-6 Online User Configuration Interface You can see what users are currently online. www.honeywell.com/security... -
Page 33: Configuration
Configuration This chapter includes descriptions about how to configuring the following: • Camera setup • Network setup • Event settings • Storage • General settings, including the following: • the device’s name and number • the interface language • the video standard •... - Page 34 The video color might become too strong if the value is too high. Note If the value is too low, the video might be poor. Mirror Enable or disable the mirror function. www.honeywell.com/security...
-
Page 35: Configuring Encoding Settings
Configuration | 35 Table 3-1 Camera Conditions Setting Description Brightness Adjusts the monitor window brightness. The default setting is The higher the number, the brighter the video. When you select a value, the bright and dark elements of the video are adjusted. - Page 36 ACF allows you to set different frame rates for motion detection recording and alarm recording. Video Enable Click to enable the extra video stream. Enabled by default. Compression The main bit stream supports H.264. The extra stream supports H.264 and MJPG. www.honeywell.com/security...
- Page 37 Configuration | 37 Table 3-2 Encoding Configurations Setting Description Resolution The NVR system supports various resolutions, which you can select from a dropdown list. Note The selection is different for each NVR series. The Performance Series Full PoE Network Video Recorders can automatically detect a connected 720p or 1080p camera’s configured resolution (as 720p or 1080p) But you must manually configure the resolution...
- Page 38 Matches the resolution of the main stream. Quality Select from six quality levels. Snapshot Frequency Set the snapshot frequency. The value ranges from 1s to 7s, or you can set a customized time. The maximum is 3600s/picture. Video Overlay Figure 3-4 Video Overlay Configurations www.honeywell.com/security...
-
Page 39: Configuring The Channel Name
Configuration | 39 Table 3-4 Video Overlay Configurations Setting Description Cover-Area 1. Select Preview or Monitor. 2. Click Set, then draw a privacy mask on the specified video in preview or on monitor video. The NVR system supports a maximum of four privacy zones. Channel Display Enable this function so that the system overlays channel information in the video window. -
Page 40: Configuring The Network Setup
40 | Performance Series Full Poe Embedded NVR Remote User Guide Figure 3-6 Channel Name Configuration Interface Enter a new channel name, then click Save. Configuring the Network Setup Configuring TCP/IP Click TCP/IP under NETWORK to open the TCP/IP configuration interface. www.honeywell.com/security... - Page 41 Configuration | 41 Figure 3-7 TCP/IP Configuration Interface Table 3-5 TCP/IP Configurations Configuration Description Mode There are two modes: STATIC and DHCP. • The IP address, submask, and gateway is inactive and not configurable when you select the DHCP mode to automatically search for the IP address.
-
Page 42: Configuring The Connection
The default is 37778. You can enter the actual port number, if necessary. HTTP Port The default is 80. You can enter the actual port number, if necessary. RTSP Port The default is 554. RTSP Format A non-configurable field that shows the RTSP format. www.honeywell.com/security... -
Page 43: Configuring Wifi
Configuration | 43 Configuring WIFI Note This section applies only to devices with Wifi capability, such as tablet computers, smartphones, and laptop computers. Click Wifi under NETWORK to open the Wifi configuration interface. Figure 3-9 Wifi Configuration Interface Click to enable Wifi. Double-click the name of a wireless device to connect to it. - Page 44 Pulse Interval Configure a time for ending the 3G connection after you close the extra stream monitor. For example, if you select 60 here, the NVR ends the 3G connection 60 seconds after you close the extra stream monitor. www.honeywell.com/security...
-
Page 45: Configuring Pppoe
Configuration | 45 Table 3-7 CDMA/GPRS Configurations Configuration Description Note If the Pulse Interval is 0, then the system does not end the 3G connection after you close the extra stream monitor. Note The Pulse Interval here is for the extra stream only. This field is inactive if you are using a main stream monitor. -
Page 46: Configuring Ddns
This works even if your IP address has changed. Select DDNS from the drop-down list. Table 3-8 DDNS Configuration Options Configuration Description DDNS Type Select the DDNS protocol from the drop-down list, then enable the DDNS function. Server IP The DDNS server IP address. www.honeywell.com/security... - Page 47 Click DDNS under NETWORK to open the DDNS configuration interface. Figure 3-13 DDNS Configuration Interface Operation Before you can use Honeywell DDNS, you need to enable this service and configure the proper server address, port value, and domain name. Table 3-9 DDNS Configurations...
-
Page 48: Quick Ddns And Client-End Introduction
Test Click the Test button to test the DDNS configuration/network connection. Email Address The Honeywell applied-for DDNS has an expiration date. When that expiration date is reached, the system sends an email prompt to this email address. Note Do not register frequently. You need to wait at least 60 seconds between registration requests. -
Page 49: Configuring The Ip Filter
Configuration | 49 Domain name: There are two modes: Default domain name and customized domain name. Except for the default domain name registration, you can also use a customized domain name. After you have successfully registered a domain name, you can log in using it instead of the device IP. -
Page 50: Configuring Email
Enter an email subject. You can use up to 32 letters or numbers. Attachment Click to enable so that a snapshot can be attached to the email. Receiver Enter the receiver’s email address. You can enter up to 3 email boxes. You can use SSL or TSL email boxes. www.honeywell.com/security... -
Page 51: Configuring Ftp
Configuration | 51 Table 3-10 Email Configurations Parameter Description Interval The interval for sending ranges from 0 to 3600 seconds. 0 means that there is no interval. Note The system will not send an email immediately when the alarm occurs. When an alarm, motion detection, or video abnormality triggers an email, the system sends out the email according to the interval that is specified here. -
Page 52: Configuring Upnp
Enable UPnP from the internet. If your UPnP is enabled in the Windows OS, then the NVR can automatically detect it through the My Network Places. Configuring UPnP Click UPnP in the NETWORK configuration interface to open the UPnP configuration interface. www.honeywell.com/security... -
Page 53: Configuring Snmp
Configuration | 53 Figure 3-17 UPnP Configuration Interface Configure the following settings: Enable Click to enable or disable UPnP. LAN IP Enter the NVR’s IP address from the TCP/IP page. WAN IP Enter the router’s IP address. (Optional) Add, edit, or delete a mapping relationship from the Port Mapping List: Add a mapping relationship: Click Add and then, in the Port Info dialog box, select the Protocol (TCP or UDP), enter the Internal Port and External Port details, and then click... - Page 54 The Trap port allows the gateway device and the client-end PC in the LAN to exchange information. SNMP Version If you check V1, then the system processes only the V1 information. If you check V2, then the system processes only the V2 information. www.honeywell.com/security...
-
Page 55: Multicast
Configuration | 55 Multicast Multicast is a transmission mode for data packets. When there are multiple hosts to receive the same data packets, multiple cast is the best option for reducing the bandwidth and the CPU load. The source host can send out just one data for transit. This function also depends on the relationship of the group member and the router group. -
Page 56: Alarm Centre
Before using the Alarm Centre, you must configure the server IP, Port, and Protocol Type. When an alarm occurs, the NVR system can send data, as defined by the protocol, to the client. Click Alarm Center under NETWORK to open the Alarm Center configuration interface. Figure 3-21 Alarm Centre Configuration Interface www.honeywell.com/security... -
Page 57: Https
Configuration | 57 HTTPS With these settings, you can ensure that the PC successfully logs in through HTTPS to guarantee communication data security. This reliable and stable technology can secure user information and device safety. Note If you have changed the device’s IP, then you’ll need to implement the server certificate again. - Page 58 A message appears to confirm that you have succeeded in creating a new server certificate. Figure 3-24 Server Certificate Confirmation Message Downloading a Root Certificate Click to open a File Download - Security Warning window. Figure 3-25 File Download Warning Click Open to open the Certificate window. www.honeywell.com/security...
- Page 59 Configuration | 59 Figure 3-26 Certificate Window Click Install Certificate to open the Certificate Import Wizard. Figure 3-27 Certificate Import Wizard Click Next to open the Certificate Store window. 800-21261V2 - A - 03/2016...
- Page 60 Select a location for the certificate. Click Next to complete the process. A message appears to let you know the process is complete. Figure 3-29 Certificate Import Wizard - Completion Message Click Finish, and a security warning pops up. www.honeywell.com/security...
- Page 61 Configuration | 61 Figure 3-30 Security Warning Click Yes. When the installation is complete, a confirmation message appears. Figure 3-31 Certificate Import - Confirmation Message Viewing and Setting the HTTPS Port Click Connection under Network to open the Connection interface. Figure 3-32 Connection Interface Login Configurations...
-
Page 62: Configuring Switch Settings
Motion Detection Configurations You can configure the system to generate a motion detection alarm when the minimum amount of motion (as defined by you) is detected in the video. Click Detect under EVENT to open the Motion Detect configuration interface. www.honeywell.com/security... - Page 63 Configuration | 63 Figure 3-34 Motion Detect Configuration Interface 800-21261V2 - A - 03/2016...
- Page 64 Work Days and the Free Days, then click OK. Note You can configure up to 6 periods within one day. 3. Configure a time range for when the event detection area is active, then click the check box to select that time range. 4. Click Save. www.honeywell.com/security...
- Page 65 Configuration | 65 Table 3-14 WEB - Motion Detection Configurations Configuration Description Region 1. Select a motion detection type. 2. Click Set. The Motion Detection Set configuration interface appears. 3. Select the event detection area by left-clicking and dragging the mouse. There are 396 (PAL) or 330 (NTSC) small zones.
- Page 66 Click to enable the Buzzer function. When an alarm occurs, the buzzer beeps. Video Loss Detection Configurations You can configure the system to generate a video loss alarm when the minimum amount of video loss (as defined by you) is detected in the video. www.honeywell.com/security...
- Page 67 Configuration | 67 Note Video loss does not support anti-dither, sensitivity, or region setup. Click Video Loss under DETECT to open the Video Loss configuration interface. Figure 3-35 Video Loss Configuration Interface The configuration for Video Loss Detection is very similar to the configuration for Motion Detection.
-
Page 68: Configuring Alarms
Before alarm operation, you should check that you have properly connected all alarm devices, such as buzzers and flashing lights. Configuring Local Alarms Click ALARM under EVENT to open the Local Alarm configuration interface. Figure 3-37 WEB - Alarm Configuration Interface www.honeywell.com/security... - Page 69 Configuration | 69 00Configuring Net Alarms Table 3-15 WEB - Alarm Configurations Configuration Description Enable Click to enable alarms. Select a channel from the drop-down list. Period Define a period during which the alarm is active. 1. Click Set. The Set configuration interface appears. 2.
- Page 70 Click to enable the Buzzer function. When an alarm occurs, the buzzer beeps. Network Alarm are the alarm signals from the TCP/IP. You cannot select the sensor type or anti-dither functions. Click Net Alarm in the ALARM configuration interface. www.honeywell.com/security...
-
Page 71: Configuring Alarm Outputs
Configuration | 71 Figure 3-38 WEB - Net Alarm Configuration Interface Configuring Alarm Outputs Click Alarm Output under SETTING to open the Alarm Output configuration interface. Figure 3-39 WEB - Alarm Output Configuration Interface Click to enable the alarm output for each alarm. Select from Schedule, Manual, or Stop, and Status. - Page 72 • Disk Error • No Space • Net Disconnection • IP Conflict • MAC Conflict You can configure how the system responds to each kind of abnormality. The configuration is similar for each type. Figure 3-41 Configuring for Abnormalities www.honeywell.com/security...
-
Page 73: Configuring Storage
Configuration | 73 Table 3-16 Configuring for Abnormalities Configuration Description Event Type Select from No Disk, Disk Error, Disk No Space, Net Disconnection, IP Conflict, and MAC Conflict. Less Than: (For No Space configuration only) Configure the minimum percentage of free space on the disk. An alarm lets you know when the disk capacity is low. - Page 74 HDD as redundant. Go to Main Menu Setting Storage HDD Management). This function is not available if there is only one HDD. Snapshot Click to enable Snapshot. Holiday Click to enable Holiday. www.honeywell.com/security...
- Page 75 Configuration | 75 Table 3-17 Scheduled Storage Settings Setting Description Setup (Sunday to Click Setup, then set a recording period. See step 2 below. Saturday) You can configure up to six periods in one day. If you do not click a day at the bottom of the Setup interface, then the changes you make are for today.
-
Page 76: Configuring Local Storage
The Local Storage interface shows HDD information. You can also configure read-only, read-write, redundancy (if there is more than one HDD), and format settings. Figure 3-44 Local Storage Interface Configuring Manual Recording Storage Settings Click Record under Storage to open the Record configuration interface. www.honeywell.com/security... -
Page 77: Configuring General Settings
Configuration | 77 Figure 3-45 Manual Recording Storage Interface Table 3-19 Recording Storage Interface Setting Description Channel See the channel numbers, including the maximum number of channels. Auto Select Schedule, and the system enables the automatic recording function as you set it in the Recording Schedule Setup: General, Motion Detection, or Alarm. - Page 78 Pack Duration Select the recording duration. Select from 1 to 60 minutes. The default is 60 minutes. Date and Time Settings Click the Date & Time tab in the GENERAL configuration interface to open the Date & Time configuration interface. www.honeywell.com/security...
- Page 79 Configuration | 79 Figure 3-47 Date & Time Configuration Interface Table 3-21 Date & Time Configurations Configuration Description Date Format Select the date format from the drop-down list. Time Format Select from either 24 hour or 12 hour. Date Separator Select from a period (.), a hyphen (-), or a slash (/).
-
Page 80: Configuring Display Settings
You need to reboot the NVR to activate changes to the resolution. Transparency Configure the transparency of the GUI display. Select from 128 to 255. Time Display/Channel Click to enable these functions, which display the time and Display channel on the video monitor. www.honeywell.com/security... - Page 81 Configuration | 81 Table 3-22 GUI Configurations Configuration Description Image Enhance Check to enable Image Enhance, to optimize the preview video. Auto Logout Enter the how long the NVR waits before automatically logging the user out. Startup Wizard Click to enable the Startup Wizard on restarting or starting up the NVR.
-
Page 82: Configuring Ptz Settings
Before configuring PTZ, please ensure the following: • The PTZ and decoder are connected correctly, and that the decoder address setup is correct. • That the correct decoder line is connected to the correct NVR line (A to A; B to B). www.honeywell.com/security... -
Page 83: Accounts
Configuration | 83 Click PAN/TILT/ZOOM under SETTING to open the PAN/TILT/ZOOM configuration interface Figure 3-52 PAN/TILT/ZOOM Configuration Interface Table 3-25 PAN/TILT/ZOOM Configuration Interface Setting Description Channel Select a channel. PTZ Type Select Remote for the PTZ type. A remotely connected IP camera is connected through the network. - Page 84 Note User rights can not exceed group rights. TIP! General users should have fewer rights than administrators. Adding a User Click Add User. The Add User configuration interface opens. www.honeywell.com/security...
- Page 85 Configuration | 85 Figure 3-54 Add User Configuration Interface Enter a Username and a Password. Re-enter the Password to confirm it. Select a Group. Select System, Playback, and Real-Time Monitor privileges. Click Save to save these new settings. Modifying a User Click under Modify to open the Modify User configuration interface.
- Page 86 Groups Click the Group tab in the Account configuration interface to open the Group configuration interface. Figure 3-56 Group Configuration Interface Adding a Group Click Add Group in the Group Account configuration interface. Figure 3-57 Add Group Configuration Interface www.honeywell.com/security...
-
Page 87: Automatic Maintenance
Configuration | 87 Enter a Group name. Select System, Playback, and Real-time Monitor privileges. Click Save to save these new settings. Modifying a Group Click under Modify to open the Modify Group configuration interface. Figure 3-58 Modify Group Configuration Interface Modify the Group privileges, then click Save to save the changes. -
Page 88: Import/Export
Use to export the corresponding WEB setup to your local PC. Default You can select to return Channel, Network, Event, Storage, and/or System settings to their defaults. Click Default under SETTING to open the Default configuration interface. Figure 3-61 Default Settings Interface www.honeywell.com/security... -
Page 89: Upgrade
Configuration | 89 Click to select, or select All, then click Default. Upgrade Click Upgrade under SETTING to open the Upgrade configuration interface. Figure 3-62 Upgrade Interface Click Browse, then click to select the upgrade file. Click Upgrade to begin the update. The file name will end with .bin. - Page 90 90 | Performance Series Full Poe Embedded NVR Remote User Guide www.honeywell.com/security...
-
Page 91: Playback
Playback This chapter includes descriptions of the following: • Playing back recorded video • Downloading recorded video Playback Click the Playback tab at the top of the Main window. The Playback interface appears. 800-21261V2 - A - 03/2016... - Page 92 Select a recording type, recording date, window display mode, and channel name to select video for playback. Click File List, and the system displays a list of recorded video clips that match the search criteria from step 2. Figure 4-2 List of Recorded Video Clips Video clips www.honeywell.com/security...
-
Page 93: Downloading Video
Playback | 93 Select a file from this list for playback, then click Play ( ). You can play back in full screen mode. Use the playback control bar to control playback. Figure 4-3 Playing Back Video Playback control bar Note For one-channel playback, the system can not play back and download at the same time. -
Page 94: Loading More
The Download button becomes the Stop button, and it indicates the downloading progress (in a percentage). Go to your default Saved Path file to view the downloaded files. See Configuring the Save Path on page Loading More Click More in Fig 13-94, and the Download by File/Download by Time interfaces appear. www.honeywell.com/security... - Page 95 Playback | 95 Figure 4-5 Download by File/Download by Time Interfaces In this window, you can search for recordings or snapshots. Select the channel, recording type, and the recording time. 800-21261V2 - A - 03/2016...
- Page 96 96 | Performance Series Full Poe Embedded NVR Remote User Guide www.honeywell.com/security...
-
Page 97: Alarms
Alarms This chapter describes how to remotely activate the alarms. Activating Alarms Click the Alarm tab at the top of the Main window. The Alarm configuration interface appears. Note For information about configuring alarms, refer to the User Guide. 800-21261V2 - A - 03/2016... - Page 98 Alarm button on the Main interface when there is an alarm. Play Alarm Click to enable the Alarm Sound. Then the Sound system triggers an alarm sound when an Alarm Sound alarm occurs. You can choose the sound. Sound Path Select the sound file. www.honeywell.com/security...
- Page 99 Alarms | 99 You can use the webpage un-install tool uninstall_web.bat to uninstall the web control plugin. Note Before uninstalling the Web control, close all web pages. If you do not, then you might experience an error. 800-21261V2 - A - 03/2016...
- Page 100 100 | Performance Series Full Poe Embedded NVR Remote User Guide www.honeywell.com/security...
-
Page 101: Index
| 101 Index Numerics buzzer abnormality 3G configurations error WLAN type motion detection 66, adding CDMA1X groups channel display users channel number, live video adjusting clear log monitor brightness configuration monitor contrast controls monitor saturation operation alarm out configuring motion detection 65, abnormality alarm out alarms abnormality buzzer... - Page 102 65, default maximum network connection DDNS server address MD&Alarm schedule domain name messages 66, Honeywell DDNS server address monitor hue HTTP port motion detection alarm out 65, maximum network connections motion detection buzzer 66, resolution motion detection emails 66,...
- Page 103 DDNS full emails overwrite abnormality stop recording error hidden default user motion detection 66, Honeywell DDNS enabling HTTP port alarm disk error configuration alarm disk full default alarm sound alarm video masking alarms video loss external alarms...
- Page 104 65, IP conflict requirements network connection non-integrated video card configuring maximum connections processor no disk error system memory no space error resolution default port restore to default settings server RTSP port upgrade period configurations NTSC time www.honeywell.com/security...
- Page 105 | 105 version remote configurations TCP/IP mode saturation remote configurations save path test default email schedules time alarm MD&Alarm zone motion detection time display search time format time sync server IP tours DDNS motion detection 66, single-channel window transparency SMTP trusted sites snapshot live video...
- Page 106 106 | Performance Series Full Poe Embedded NVR Remote User Guide www.honeywell.com/security...
- Page 108 Document 800-21261V2 – Rev A – 03/2016 © 2016 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof.