Save & Exit Menu - Congatec conga-IA4 User Manual

Inexpensive ATX power supplies often have problems with short AC power sags. When using these ATX power supplies it is possible that
the system turns off but does not switch back on, even when the PS_ON# signal is asserted correctly by the module. In this case, the internal
circuitry of the ATX power supply has become confused. Usually another AC power off/on cycle is necessary to recover from this situation.
8.8 Save & Exit Menu
Select the Save & Exit tab from the setup menu to enter the Save & Exit setup screen. You can display a Save & Exit screen option by highlighting
it using the <Arrow> keys.
Feature
Save Options
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Default Option
Restore Defaults
Save as User Default
Restore as User Default
Boot Override
List of all boot devices
currently detected
Generate Menu Layout File
Copyright © 2016 congatec AG
Description
Exit setup menu after saving the changes. The system is only reset if settings have been changed.
Exit setup menu without saving any changes.
Save changes and reset the system.
Reset the system without saving any changes.
Save changes made so far to any of the setup options. Stay in setup menu.
Discard changes made so far to any of the setup options. Stay in setup menu.
Restore default values for all the setup options.
Save the changes done so far as User Defaults.
Restore the User Defaults to all the setup options.
Select device to leave setup menu and boot from the selected device.
Only visible and active if Boot Priority Selection setup node is set to "Device Based".
Menu layout file will be generated and stored on the first writable file system found.
IA40m12.indd 94/97