Graphics Power Management Control Submenu - Congatec conga-IA4 User Manual

Feature
GTT Size
IGD Thermal
Spread Spectrum clock
WOPCMSZ
ISP Enable/Disable
ISP PCI Device Selection
PUNIT Power Configuration
Svid Configuration
8.5.1.2

Graphics Power Management Control Submenu

Feature
RC6 (Render Standby)
Power Meter Lock
Copyright © 2016 congatec AG
Options
2MB
4MB
8MB
Enabled
Disabled
Enabled
Disabled
1MB
2MB
4MB
8MB
Enabled
Disabled
Disabled
ISP PCI Device as B0D2F0
ISP PCI Device as B0D3F0
ISP PCI Device as B0D3F0 with Virtual ISP B0D2F0
Disabled
Enabled
Platform Defaults
Svid Config 0
Svid Config 1
Svid Config 3
Svid Config 4
BSW I2C PMIC Config
Options Description
Enabled Enable or disable render standby support.
Disabled
Enabled Enable or disable power meter lock.
Disabled
Description
Select the GTT size.
Enable or disable IGD thermal.
Enable or disable spread spectrum clock.
Set the size for WOPCMSZ.
Enable/Disable ISP PCI Device Selection.
Default ISP is PCI B0D2F0 for window boot. Linux boot to select
B0D3F0.
Enable or disable PUNIT power configuration.
Select the right SVID configuration.
IA40m12.indd 82/97