Copyright, Limitation Of Liability And Revision Rights - Danfoss ADAP-KOOL AKD 102 Operating Instructions Manual

Introduction
1
1

1.1.2 Copyright, Limitation of Liability and Revision Rights

This publication contains information proprietary to Danfoss. By accepting and using this manual the user agrees that the
information contained herein will be used solely for operating equipment from Danfoss or equipment from other vendors
provided that such equipment is intended for communication with Danfoss equipment over a serial communication link.
This publication is protected under the Copyright laws of Denmark and most other countries.
Danfoss does not warrant that a software program produced according to the guidelines provided in this manual will
function properly in every physical, hardware or software environment.
Although Danfoss has tested and reviewed the documentation within this manual, Danfoss makes no warranty or represen-
tation, neither expressed nor implied, with respect to this documentation, including its quality, performance, or fitness for a
particular purpose.
In no event shall Danfoss be liable for direct, indirect, special, incidental, or consequential damages arising out of the use, or
the inability to use information contained in this manual, even if advised of the possibility of such damages. In particular,
Danfoss is not responsible for any costs, including but not limited to those incurred as a result of lost profits or revenue,
loss or damage of equipment, loss of computer programs, loss of data, the costs to substitute these, or any claims by third
parties.
Danfoss reserves the right to revise this publication at any time and to make changes to its contents without prior notice or
any obligation to notify former or present users of such revisions or changes.
1.1.3 Available Literature
- Operating Instructions MG.11.Lx.yy provide the neccessary information for getting the drive up and running.
- Design Guide MG.11.Mx.yy entails all technical information about the drive and customer design and applications.
- Programming Guide MG.11.Nx.yy provides information on how to programme and includes complete parameter
descriptions.
- Operating Instructions AKD102 High Power, MG.11.Ox.yy
- Operating InstructionsAKD LonWorks, MG.11.Px.yy
x = Revision number
yy = Language code
Danfoss Drives technical literature is also available online at www.danfoss.com/BusinessAreas/DrivesSolutions/Documentations/
Technical+Documentation.htm.
4
®
ADAP-KOOL Drive Operating Instructions
®
MG.11.L4.02 - ADAP-KOOL Drive